Systemise Your Trade
Jobs

Landlord and letting agent jobs: who approves the work, how to get into the property and who to invoice

The works order to ask for, what to do when a job goes over the agent's limit, how to book access with the tenant, the landlord's gas and electrical deadlines you work to, and an invoice that gets paid in the next payment run.

An electrician at the door of a rented flat checking a works order on his phone while the tenant shows him in

On landlord and letting agent jobs, the person who lets you in, the person who approves the work and the person who pays are often three different people. Before you book, get the job in writing from whoever is instructing you, with the property, the work, any spending limit and the name the invoice goes to. Book access through the agent, record anything the tenant asks for as a separate request, and send the paperwork and invoice to the address on the order.

This guide is for plumbers, heating engineers, electricians, builders and other owner-run trade firms who take repair, maintenance and safety check work from private landlords and letting agents. It sits under our guide to recording trade jobs on site, and it follows a rented home job from the first instruction to the paid invoice.

Who you work for on a rented home

A private homeowner is usually the person who calls you, lets you in, approves the price and pays. On a rented home those jobs split up.

The landlord owns the property and is the one with the legal duties for repairs and safety checks. The letting agent, if there is one, may manage the property for the landlord and instruct trades on the landlord's behalf. The tenant lives there, reports the problem and opens the door, but in most cases isn't paying you and can't approve the work.

That matters because the person who approves the work is the person you can ask to pay for it. A tenant who says "while you're here, could you" isn't agreeing to pay, and an agent can only approve what the landlord has allowed them to spend.

Job stepLandlordLetting agentTenantYou
Reports the problemSometimesPasses it onUsuallyNo
Instructs the workIf self-managingIf managing the propertyNoNo
Approves the priceAlways the final sayUp to their agreed limitNoNo
Arranges accessGives noticeUsually gives noticeLets you inConfirms the time
Gets the certificatesMust give copies to the tenantOften passes them onReceives copiesSupplies them
Pays the invoicePays, directly or through the agentOften pays from rent heldNoInvoices the name on the order

Ask at the first call whether the agent manages the property or only found the tenant. A let-only agent often has no authority to instruct work, so the landlord is your contact.

Get a works order before you book

Most managing agents send a written works order or job reference for each job. Ask for one every time, and don't book until you have it. A phone call from someone at the agency isn't enough when the invoice is queried three weeks later.

A usable order names the property address, the work, the order number, any spending limit, the tenant's contact details for access, and who the invoice is addressed to. If it doesn't, send the agent the details below and ask them to confirm by reply.

Job details to confirm with the agent before you book

Before I book this in, please confirm by reply: the property address, the work you're instructing, your order or job number, the most you've approved for this job before I need to come back to you, the tenant's name and phone number for access and whether I can contact them directly, where the keys are if no one will be in, and the name and address the invoice goes to. If the work costs more than the limit, I'll stop and send you a price before doing any more.

Keep the reply with the job, and write the order number on the job sheet. It's the first thing the agent's accounts team will look for on your invoice.

Spending limits and landlord approval

Many management agreements let the agent approve repairs up to a set amount without asking the landlord. Above it, the agent has to get the landlord's agreement first. The limit varies by agent and by landlord, so ask what it is for each property.

When a job turns out bigger than the order allows, stop at the limit and send a price. Say what you found, what it will cost to put right, and what you've done so far. Then wait for a revised order in writing before carrying on. If you go ahead on a verbal "should be fine" and the landlord refuses, you're arguing with an agent who had no authority to approve it.

If something is unsafe, make it safe within the order and say so. You don't need approval to turn off a leaking supply or isolate a dangerous circuit, but you do need it to replace the boiler. Our variation form template covers how to price and word a change, and the same form works when the approval comes from an agent rather than the person living there.

Booking access with the tenant

A letting agent handing a plumber a set of tagged keys across the office counter

The tenant has the right to live in the property undisturbed. GOV.UK tells landlords that they must give tenants at least 24 hours' notice to enter for repairs, although immediate access may be possible in an emergency. That notice is the landlord's duty, and agents usually give it on the landlord's behalf.

So confirm with the agent that notice has been given, or that the tenant has agreed a time, before you turn up. If the agent says you can contact the tenant yourself, use a short message that names who sent you and offers times.

Access message for the tenant (send once the agent has agreed it)

Hello, this is [your name] from [business name]. [Agent name] has asked us to [work] at [address]. Could we come on [day] between [time] and [time], or [day] between [time] and [time]? The visit should take about [length]. Please reply with the time that suits, or let [agent name] know if neither works. If no one will be in, the agent has keys and we'll let you know when we've left.

If you collect keys from the agent, sign them out and back on the same day, and write the key collection and return on the job sheet. Never copy keys or keep a key safe code after the job.

When a tenant refuses or doesn't answer, tell the agent the same day with the dates you tried. Don't push the door. HSE's advice to landlords on gas checks says a landlord must show they took all reasonable steps, and your record of attempts is part of that.

When the tenant asks for extra work

Tenants often ask for small extras once you're inside: a dripping tap in the bathroom, a loose socket, a radiator that doesn't warm up. They aren't usually able to approve the work or the price, so treat each one as a separate request for the agent.

Write it in the visit notes and photograph it. Then put it in your report to the agent with a price, and let the agent decide. If it's something you would normally fix in two minutes at no charge, say so in the report too, so no one is surprised to see it done.

Never agree a price directly with the tenant for work on the landlord's property unless the agent has told you the tenant is paying. A tenant who pays you for a repair the landlord should have done may later want it back from the landlord, and you'll be in the middle.

Gas safety checks for landlords

Landlords must have gas appliances and flues they provide checked every year and give tenants a copy of the record. If you're a Gas Safe registered engineer doing these checks for agents, a few details from HSE's guidance help you plan the work.

HSE says the management contract between landlord and agent should clearly say who arranges maintenance and safety checks and who keeps the records. Ask the agent which of them you report to. HSE also says the annual check can be done up to two months before the deadline without losing the original date, which gives you room to group several properties for one agent.

The record goes to the landlord, but HSE's guidance on gas safety check records says a gas engineer can send an electronic copy straight to the tenant if the landlord agrees and the tenant is happy to receive it that way. Landlords must give existing tenants a copy within 28 days of the check, so sending it to both at once saves the agent a step. HSE also says the record should be issued when the check is finished and not held back because defects were found.

If you disconnect or cap an unsafe appliance, tell the agent the same day, not in the end-of-week report. HSE tells landlords that if a heating appliance is disconnected they must provide the tenant with emergency heating, and the agent can only arrange it if they know. Anyone who smells gas should call the gas emergency number on 0800 111 999, or 0800 002 001 in Northern Ireland.

Electrical reports and the 28-day clock

An electrician writing up test results beside the consumer unit in a rented flat

In England, private landlords must have the fixed electrical installation inspected and tested by a qualified person at least every five years. GOV.UK's guidance on electrical safety standards in rented homes says the landlord must give existing tenants a copy of the report within 28 days of the inspection.

The deadline that matters most to you is the next one. Where the report calls for remedial work or further investigation, the landlord must have it done within 28 days, or sooner if the report says so. Then, within 28 days of the work being finished, the landlord must give the tenant and the council written confirmation from the person who did it.

That puts a clock on every C2 or FI item you code. Send the report and a price for the remedial work on the same day, and ask the agent to get the landlord's approval quickly. If the approval arrives late, write down when it came. And when the work is done, send written confirmation the agent can forward, because without it the landlord can't meet their deadline either. Councils can fine landlords up to £40,000 for breaching these duties, so agents tend to chase.

Reporting to the agent after the visit

Send one report per visit, by email, with the property address and the order number in the subject line. It should cover:

  • what you found and what you did
  • what's still outstanding and why
  • any extra work the tenant asked for, with a price
  • any certificate or record, attached or with the date it will follow
  • anything made safe or disconnected, and what the landlord now has to do
  • photos of the fault, the finished work and anything you couldn't reach

If the job produced certificates, warranty registrations or instructions, say who gets which. Our customer handover pack guide has a section on rented homes, where the landlord needs the certificates and the tenant needs the instructions.

Illustrative example: an agent-managed flat

This is an invented example to show the routine in use. The firm, agent, tenant and figures are made up.

Illustrative example: an electrical check on an agent-managed flat

Monday week 1: the agent emails order 2231 for an electrical installation condition report at Flat 4, limit £250, invoices addressed to the landlord via the agent. The electrician replies with the job details message and the agent confirms the tenant's number and that she can be contacted directly.

Tuesday week 1: the electrician sends the access message. The tenant offers Thursday at 10am, and the agent confirms 24 hours' notice has been given.

Thursday week 1: the inspection finds two C2 items and one FI. The tenant asks for an extra double socket in the bedroom. The electrician notes it, sends the report, a £680 remedial price and a separate £95 socket price to the agent that afternoon, and writes the 28-day deadline on the job.

Monday week 2: the landlord approves the remedial work but not the socket. The agent sends order 2231/1 for £680.

Wednesday week 2: the remedial work is done and the electrician emails written confirmation the same day for the agent to send to the tenant and council.

Thursday week 2: one invoice to the landlord care of the agent, quoting 2231 and 2231/1: inspection £180, remedial work £680, £860 plus VAT of £172, total £1,032.

Tuesday week 4: paid in the agent's fortnightly payment run.

The socket wasn't done, and no one argued about it, because the request went to the agent with a price instead of being fitted on the tenant's say-so. The remedial work was finished 13 days after the inspection, well inside the 28 days, because the price went in the same afternoon.

Who to invoice and when you get paid

Address the invoice to the name the works order gives, usually the landlord care of the agent, or the agent itself if its terms say it pays trades directly. Quote the order number, the property address and the visit date, and attach the report or certificate. An invoice without the order number is the one that sits in a queue.

Many agents pay trades from the rent they collect, in a weekly or fortnightly payment run. Ask when the runs are and what the cut-off is, and send invoices before it. If the landlord hasn't left enough money with the agent, the agent may wait for the landlord to top it up, so ask at the start of a large job whether funds are in place.

Our invoice template for trades shows what a VAT invoice has to include. Put your payment terms and due date on every invoice, and chase the agent's accounts team, not the tenant.

Landlords are often in business when they let property, which affects more than the invoice. Our guide to cancellation rights for trade work explains when a landlord counts as a consumer with a 14-day right to cancel, and why it's the grey area.

CIS and VAT on landlord work

The Construction Industry Scheme usually doesn't apply to small landlords. GOV.UK says a business that doesn't do construction work becomes a 'deemed' contractor once it has spent more than £3 million on construction in 12 months, and the exemption for a deemed contractor's own business premises doesn't cover property that's for rent. A large property company or a housing association you work for could be one, so ask if it's not clear, and register as a subcontractor if they are.

VAT works the same way as for any other customer. If you're VAT registered, charge it at the normal rate and put the customer named on the order on the invoice. The domestic reverse charge only applies when the customer is registered for both VAT and CIS and isn't the end user, so it rarely applies to a landlord or agent. A VAT-registered landlord's company will need a full VAT invoice to reclaim the VAT.

The gas safety rules apply across Great Britain, and Northern Ireland has its own, enforced by HSENI. The electrical safety and access rules described here are England's; Wales and Scotland have their own rules for rented homes. This is not legal advice or tax advice. It summarises the HSE, GOV.UK and HMRC pages linked here; check your scheme's guidance and the agent's terms before relying on it.

Ask your agents for their works order rules

Pick the three agents who send you the most work and ask each of them four things this week: whether they send a written order for every job, what their spending limits are, how they want access arranged, and when their payment runs close. Write the answers on a single page for each agent and keep it with your job sheets.

List what your app records for each agent, then fill in the job sheet

Sources checked for this guide

Gas, electrical, access and CIS points checked against HSE, GOV.UK and HMRC guidance. These are the primary sources used in this guide.

Your analytics choice

Optional Google Analytics helps us understand which pages are useful. It stays off unless you accept. Rejecting does not affect the site. Cookies and storage