Terms and conditions for trades are the written rules that go out with every quote: what happens if the job changes, when payment is due, what happens if either side cancels, how delays and defects are handled, and how to complain. A short, plain set agreed before the work starts settles most arguments before they begin. For home customers, though, the law adds rights you can't write out, and a term that's unfair to the customer won't bind them, however clearly it's printed.
Below are the terms most owner-run trade firms need, the rights the law gives home customers whatever you write, the kinds of term that are often unfair, how to get the terms agreed, and a set of plain terms to copy and adapt. Our guide to writing a quote for trade work covers the quote itself.
What the terms do that the quote doesn't
The quote says what this job is and what it costs. The terms say how you work on every job. Keeping them apart means you can write the quote fast, because the rules that never change are already on a separate sheet.
A quote without terms leaves gaps that tend to come up at the worst moment. What happens when the customer adds a socket halfway through? When is the balance due? Can you keep the deposit if they cancel after you've ordered a bespoke vanity unit? Without a written answer, the customer's view and yours are both guesses, and a dispute over money is slower to settle.
Terms don't have to be long. One side of A4 in plain English covers most domestic work. Our quote template for trade work has a space for them on the quote itself.
What to cover in your terms and conditions
Most domestic trade work needs the same handful of terms. The table sets out each one and the point where traders most often go wrong.
| Term | What it covers | Watch for |
|---|---|---|
| The quote and scope | That the quote lists the work, materials and price, and what isn't included | Saying the price can change without saying when and why |
| Changes and extra work | How extras are priced and agreed before you do them | Doing extras on a nod and billing later |
| Start date and timing | When you'll start, and what happens if either side causes a delay | Leaving the timing out entirely |
| Access and services | Access, parking, water and power while you work | Charging for waiting time the customer wasn't told about |
| Materials the customer supplies | Who is responsible for fittings the customer buys | Refusing responsibility for your own fitting work |
| Payment | Deposit, stage payments, when the balance is due, how to pay | Penalties that are far higher than your real loss |
| Cancelling | What happens if either side cancels, before and after any cooling-off period | Keeping a deposit with no matching promise if you cancel |
| Defects and guarantees | Coming back to put things right, and any workmanship guarantee | Wording that suggests the customer has no other rights |
| Complaints | Who to contact and how | No name or contact route at all |
Add terms your trade needs, such as making good after electrical work or the removal of old appliances. Leave out anything you wouldn't enforce. A term you never use only gives a customer something to argue about.
Rights home customers keep whatever you write
When you work for a home customer, the Consumer Rights Act 2015 puts terms into every service contract. You must do the work with reasonable care and skill. What you tell the customer about yourself or the work, which they rely on, becomes part of the contract. Where the price or the time isn't fixed, you have to charge a reasonable price and finish within a reasonable time.
Section 57 of the Act says a term isn't binding on the consumer to the extent it would exclude your liability for reasonable care and skill. The same section stops you restricting those rights in a way that would prevent the customer getting their money back in an appropriate case. Goods you supply as part of the job, such as a boiler or a tap, carry their own rights to be of satisfactory quality, fit for purpose and as described, and fitting them is part of that. Those can't be excluded either.
If the work isn't done properly, the customer can ask you to do it again, and if that isn't possible within a reasonable time and without significant inconvenience, they can ask for a price reduction. Your terms can set out how you'll handle a problem, but they can't take those rights away.
The fairness test for home customers

Beyond those fixed rights, every other term in a home customer's contract has to be fair. Section 62 of the Consumer Rights Act says an unfair term of a consumer contract is not binding on the consumer. A term is unfair if, contrary to the requirement of good faith, it causes a significant imbalance in the rights and obligations of the two sides, to the customer's detriment.
Two things follow for a trade firm. First, the customer can ignore an unfair term, but can still rely on it if it helps them. Second, a court has to consider whether a term is fair even if neither side raises the point. The CMA's guidance on unfair contract terms (CMA37) adds that traders can't rely on unfair terms and may have to repay money taken under them.
So an unfair term isn't a safe fallback. If it's the term you're relying on to keep a deposit or charge a fee, you may end up repaying it.
Terms that are often unfair
Schedule 2 of the Act lists terms that may be regarded as unfair. It's a guide, not a ban list: a term on it isn't automatically unfair, and a term not on it can still be unfair. But it shows where trade terms most often go wrong.
- Excluding or limiting your liability if your work causes death or personal injury. The Act bars this outright for consumer contracts.
- Keeping money the customer has paid when they cancel, without a matching promise to compensate them if you cancel.
- Charging a customer who cancels a sum far higher than your real loss, or charging for work you haven't done.
- Charging a customer who pays late or breaks the contract a disproportionately high sum.
- Letting you change the terms, the work or the materials after the customer is bound, without a valid reason the contract states.
- Letting you set or raise the price after the customer is bound, without giving them the right to cancel if the final price is too high.
- Binding the customer to terms they had no real chance to read before agreeing.
"Deposits are non-refundable" is the most common example in trade terms. Our guide to taking a deposit before starting work covers what you can keep, and the wording that ties the deposit to real costs.
Price and scope terms

The terms that set out the main subject of the contract, and the price, get special treatment. The Act says they can't be assessed for fairness by comparing the price with the work, but only if they're transparent and prominent: in plain language, legible, and brought to the customer's attention so that an average customer would be aware of them.
In practice, that means the price and what it covers belong on the quote, in plain view, not in the small print. If your terms let the price change, say exactly when: a provisional sum for a hidden pipe run, for example, with the rate you'll charge. A clause that lets you charge whatever you think fit later is exactly the kind the Schedule 2 list describes.
Our guide to quotes and estimates covers how to word a fixed price, a range or a provisional sum so the customer knows which they're getting.
Write them so a customer understands
The Act also says written terms for home customers must be transparent: plain and intelligible language, and legible. If a term could have two meanings, the meaning most favourable to the customer wins. So a vague term doesn't give you room to choose; it gives the customer the better reading.
Write as you'd explain it on the doorstep. "If you cancel after the 14 days, we'll charge for the work done and the parts we can't send back" is clearer than a paragraph of legal phrasing, and more likely to be read as fair.
The CMA's guidance says terms that could work against the customer need to be brought to their attention, and traders shouldn't assume customers can pick out the important terms for themselves. Put payment, cancellation and charges near the top, not on the back of page three.
Get the terms agreed before the job
Terms only count if they were part of the deal when the customer agreed. Send them with the quote, every time, as the second page of the PDF or a clearly named attachment. A link to your website on its own is easy to miss.
Ask the customer to accept the quote and the terms together, in a way you can find again: a signed copy, a reply to the email, or the accept button in your quoting app, which records the date. Keep that record with the job.
If the work is agreed in the customer's home, or by phone or online, the Consumer Contracts Regulations also require the cancellation information and form before the customer is bound. Our guide to cancellation rights for trade work covers which jobs carry the 14 days and what to give the customer.
Payment terms to set out
Say how much is due, when, and how. Most domestic jobs need three lines: any deposit, any stage payments tied to visible progress, and when the balance is due after completion. Add the ways you accept payment and the details to pay to.
If you want to charge interest on a home customer's late payment, it has to be agreed in the terms before the work starts, at a rate that isn't excessive. Business customers are different: the late payment rules give you interest and a fixed sum without a term. Our guide to charging interest on late payment covers both.
| Payment | When it's due | How to word it |
|---|---|---|
| Deposit | When the customer accepts the quote | A set amount that covers materials ordered for their job |
| Stage payment | When a stage the customer can see is finished | Name the stage, such as first fix complete |
| Balance | On completion, or a set number of days after the invoice | Give the number of days and the ways to pay |
Keep penalties close to your real costs. A late fee several times the cost of chasing the money is the kind of term the Schedule 2 list describes as potentially unfair.
Cancelling, by either side
Customers who agree work at home or at a distance may have a 14-day cooling-off period, set by the regulations, not by your terms. After that, your terms decide what a cancellation costs.
Keep it balanced. If the customer cancels, you can usually charge for the work done so far and for any special-order materials you're left with. If you cancel, promise to refund anything paid for work not done. A term that lets you walk away and keep the money, but charges the customer heavily for doing the same, is on the Schedule 2 list twice over.
Delays, access and things outside your control
Say when you expect to start and roughly how long the work will take. If the contract doesn't fix a time, the Act says you must finish within a reasonable time. Promise to tell the customer as soon as you know of a delay, and say what happens if they cause one, such as no access on the agreed day.
List what you need from the customer: clear access to the work area, somewhere to park, water and power, and pets kept away. If you'll charge for a wasted visit, say so and say how much. A fee the customer wasn't told about in advance is hard to recover.
Defects and guarantees
Say how a customer reports a problem and how quickly you'll respond. Promise to come back and put right anything that isn't done properly. That's the customer's legal right anyway, and saying so plainly builds trust.
If you offer a workmanship guarantee, give the period and what it covers, and add "This is in addition to your legal rights." A guarantee that reads as the only remedy the customer has could mislead them about their rights. If manufacturers' warranties need registering, say who will register them.
Business customers and landlords
When the customer is a business, such as a landlord company, a letting agent or a main contractor, the consumer rules above don't apply. The Unfair Contract Terms Act 1977 does. In England, Wales and Northern Ireland, you can't exclude liability for death or personal injury caused by negligence. Where you deal on your own written standard terms, section 3 says you can't exclude or restrict liability for your own breach except so far as the term is reasonable. Scotland has its own version of these rules, in a different part of the same Act.
The late payment rules for business customers apply whatever your terms say, unless the contract has its own substantial remedy. For construction work under a main contractor, their subcontract terms usually replace yours, so read those instead.
This is not legal advice. It summarises the Consumer Rights Act 2015, the Unfair Contract Terms Act 1977 and the CMA's guidance. Have your finished terms checked by a solicitor, your trade body or a scheme that offers a contract review.
Illustrative example: three terms rewritten for a bathroom fitter
The terms below are made up to show the method. A bathroom fitter took them from an old set of terms and rewrote them.
Illustrative example: three terms rewritten for a bathroom fitter
Old term 1: All deposits are non-refundable.
New term 1: If you cancel after any cooling-off period, we'll keep only what we've spent on materials ordered for your job that we can't return or use elsewhere, plus work already done. If we cancel, we'll refund everything you've paid for work not done.
Old term 2: Prices may be changed at our discretion.
New term 2: The price is fixed unless the quote marks an item as provisional. We'll agree any change to the price with you in writing before doing the work.
Old term 3: We accept no liability for any damage however caused.
New term 3: We'll protect your floors and fittings while we work and put right any damage we cause.
The new versions are longer, but each one says what happens and who pays. They're also the terms a customer is more likely to accept without arguing, and the ones you could rely on if they did.
Terms to copy and adapt
The terms below are a plain starting point for domestic work. Change the parts in square brackets, delete any that don't fit your trade, and have the finished set checked before you use it. The names, amounts and periods in square brackets are invented placeholders.
Send your terms out with the next quote
This week, take the terms you use now, or the set above, and check each one against the Schedule 2 list. Rewrite anything you wouldn't be comfortable explaining to the customer face to face. Then attach the finished set to your next quote and ask the customer to accept both together.
Test your quoting app with your terms attached
Sources checked for this guide
Unfair terms and consumer rights points checked against the Consumer Rights Act 2015, the Unfair Contract Terms Act 1977 and CMA guidance. These are the primary sources used in this guide.
- legislation.gov.uk, Consumer Rights Act 2015, section 57 (checked 11 November 2026)
- legislation.gov.uk, Consumer Rights Act 2015, section 62 (checked 11 November 2026)
- legislation.gov.uk, Consumer Rights Act 2015, Schedule 2 (checked 11 November 2026)
- CMA, Unfair contract terms guidance (CMA37) (checked 11 November 2026)
- legislation.gov.uk, Unfair Contract Terms Act 1977, section 3 (checked 11 November 2026)


